Sending a Fax by Automatic Dialing
START/
You can also enter a full number with the number keys and then press ENTER
to begin dialing.
1 Load the document(s). (Note: If desired, you can load the document after dialing in Step 2, below.)
SEND READY will appear in the display.
•Press RESOLUTION and/or CONTRAST to
set the resolution and contrast if needed.
•To send the document ahead of other documents waiting for transmission,
press PRIORITY .
•To send the document directly from the feeder (not through memory), press
DOCUMENT | . (Flip up the Rapid Key overlay if it is down.) |
M/? |
2 Enter the number of the receiving machine by pressing the numeric keys.
•If a pause is required between any of the digits to access a special service or an outside line, press REDIAL (two seconds per pause). The pause will appear as a hyphen. Several pauses can be entered in a row.
3 Check the display. If the number of the receiving machine shown is
START/
correct, press ENTER .
• If it is not correct, press | STOP |
to backspace and clear one digit at a time, |
and then
2. Sending Documents
47