Optional Settings

Setting 31: SEPARATE MODE

If desired, you can have the fax draw a sheet of paper from one of the paper sources after each fax reception. By loading colored (or large) paper in that source, each colored sheet drawn will act as a separator that makes it easy to distinguish where one multi-page document ends and another begins. A Transaction Report printed after a reception will also be printed from that

paper source to act as a separator sheet. To turn on this function, press

1

and then select the paper source for the separator paper by pressing 1

for

the paper tray or 2 for the paper cassette. After turning on the function, be sure to load appropriate paper in the selected paper source. To turn off Seperate mode, press 2 . (Note that the function will turn off automatically if

the selected paper source runs out of paper.)

Note: This setting is only available if your dealer has installed the paper cassette option.

♦Initial setting: 2

Note: If you turn off the Separate Mode setting, Option Setting 16 will subsequently appear in the display to allow you make an appropriate setting for cassette selection. If you don’t make a selection, 1:AUTO SELECTION will be automatically selected.

Note: Settings 32 and 33 are not used.

Setting 34: LANGUAGE SELECT

This setting is used to select the language that appears in the display. Press 1 to select English or 2 to select French.

♦Initial setting: 1

Note: Settings 35 through 38 are not used.

6. Optional Settings

115