Administrator Password

Administrator Password

The administrator of the machine can set a password to protect the settings

 

that are accessed with the

 

MENU

key. When the password is set and

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

protection is enabled, the display will prompt you to enter the administrator

 

password each time you press

MENU

 

to configure a MENU setting.

 

 

Setting an administrator password

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1 Press the following sequence of keys:

Display:

 

 

 

 

MENU

 

 

COPY/HELP

 

 

 

START/

 

ADMIN PASSWORD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

,

,

 

 

,

, 1 ,

ENTER

.

ENTER #(1-2, , )

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This is a hidden operation, and therefore error beeps may sound and the display may not respond normally when you press several of the above keys. Disregard the error beeps and display while pressing the keys.

If password protection (page 29) is already enabled, a password entry

screen will appear after you press MENU . Continue to press the above keys without entering the password.

2 Press 1 to set the password.

1:ADMIN PASSWORD SET

 

 

 

ENTER OLD PASSWORD

 

 

 

 

 

 

 

 

 

3 Press the numeric keys and/or the letter keys to enter the old (currently set) password.

If you are setting the password for the first time, enter “Sharp” (this is the initial factory-set password).

Each character/digit that you enter will be displayed as “+“.

28