CHANGING PAPER IN A TRAY

Names of the trays

The names of the trays are shown below.

For the number of sheets of paper that can be loaded in each tray, see the following manuals:

Operation Guide, "Paper Tray Settings" in "7. SYSTEM SETTINGS"

Safety Guide, "SPECIFICATIONS"

(6)

(1) Tray 1

(5)

 

(2) Tray 2

 

(3) Tray 3

(1)

(4) Tray 4

(2)

(5) Tray 5 (large capacity tray)

 

(3)

(6) Bypass tray

(4)

 

Print side face up or face down

Paper is loaded with the print side face up or face down depending on the paper type and tray.

Trays 1 to 4

Load the paper with the print side face up.

However, if the paper type is "Pre-Printed" or "Letter Head", load the paper with the print side face down*.

Bypass tray and tray 5

Load the paper with the print side face down.

However, if the paper type is "Pre-Printed" or "Letter Head", load the paper with the print side face up*.

*If "Disabling of Duplex" is enabled in the system settings (administrator), load the paper in the normal way (face up in trays 1 to 4; face down in the bypass tray and tray 5).

18

Page 20
Image 20
Sharp MX-4100N, MX-5000N, MX-4101N, MX-5001N Changing Paper in a Tray, Names of the trays, Trays 1 to, Bypass tray and tray