Sharp MX-5000N Selecting A Special Mode, Place the originals, Select settings in the touch panel

SELECTING A SPECIAL MODE

The procedure for selecting a special mode for fax is explained below.

The settings that must be selected vary for each special mode, however, the general procedure is the same. The procedure for erasing shadows at the edges of the image when sending a fax is explained below as an example.

The side to be scanned must be face up!	1 Place the originals.
	When using the document glass, place the original with the
	side to be scanned face down.

Scan Internet Fax Fax USB Mem. Scan PC Scan

Address Book	Original	Scan:	Auto	A4	Send:	Auto
Direct TX	Exposure	Auto

Sub Address Resolution Standard

Address Review Special Modes

File(1)

Quick File

2 Select settings in the touch panel.

(1) Touch the [Special Modes] key.

Preview

Auto Reception

Fax Memory:100%

Fax/Special Modes					OK
	Program	Erase		Dual Page
				Scan
		(2)in1			1
	Timer		Card Shot
					2
	Job	Mixed Size		Slow Scan
	Build	Original		Mode
	Original	File	Quick File
	Count

(2)Touch the [Erase] key.

The erase settings will be configured to erase a width of 15 mm around the edges of the original.

Fax/Special ModesOK

								(4)
Erase				Cancel					OK
	Edge	Centre	Edge+Centre
	Erase	Erase	Erase		Edge
						15
							(0~20)
							mm

Side Erase

(3)

(3)Set the erasure width to 15 mm with the keys.

The erase area is set to "Edge Erase" by default. To select "Centre Erase", "Edge+Centre Erase", or "Side Erase", touch the appropriate key.

(4)Touch the [OK] key.

3 Enter the fax number of the receiving fax machine and press the [BLACK & WHITE START] key.

Cancel scanning

75