Sharp XE-A42S Advanced Programming, s1 @, s2 @, Register number, Setting consecutive numbers

ADVANCED PROGRAMMING

1Register Number and Consecutive Number Programming

Register number and consecutive number are printed on every receipt and journal.

When your store has two or more registers, it is practical to set separate register numbers for identification. The consecutive number is increased by one each time a receipt and/or journal is issued.

For consecutive number programming, enter a number (max. 4 digits) that is one less than the desired starting number.

Register number

To set the register number “0”

s1@ Register number (one to six digits) sA

Key operation example Print

s1 @

123456 sA

Register number

Setting consecutive numbers

			To begin the count from 0001
s	2	@		s	A
			A number (one to four digits) that is one
			less than the desired starting number

Key operation example

s2 @

1000 sA

Print

Consecutive number

2Various Function Selection Programming 1

The cash register provides various detailed functions listed below.

•Function selection for miscellaneous keys

•Print format

•Receipt print format

•Function selection for tax

•Function selection for UPC codes

•Others

For this programming, the job code entry style is applied. You can continue programming until you press the

Akey for the programming described in this section. To continue programming, repeat from a job code

entry.

52