Sharp XE-A42S s 10 @ *ABCD s A, Various Function Selection Programming, Power save mode, Job code

Job code: 70
* Item:			Selection:	Entry:
	A	Split pricing counting	Quantity*	0
			Package	1
	B	Multiplication/split pricing entry availability Allow multiplication entry only*		0
			Allow both of multiplication and split pricing	1
	C	Always enter 0.	(Fixed position)	0
	D	Always enter 0.	(Fixed position)	0
	E	Always enter 0.	(Fixed position)	0
	F	Always enter 0.	(Fixed position)	0
	G	Always enter 0.	(Fixed position)	0
	H	Always enter 0.	(Fixed position)	0

3Various Function Selection Programming 2

The cash register provides various options so you can use the register to suit your sales needs.

In this section, you can program the following features (parameters within parentheses indicates default setting):

•Power save mode (entering the power save mode after 30 minutes)

•Logo message print format (graphic logo only)

•High amount lockout (HALO) for cash in drawer (CID) (9999999.99) (sentinel) - When the cash in drawer reaches the amount programmed, the sentinel mark “X” will be displayed at the leftmost position on the lower line of the operator display.

•Thermal printer density (standard density)

•Online time out setting

•Language selection (English)

•Training clerk specification (none) - If you specify a clerk code who is trained for use on this cash register, the cash register will go into training mode when the clerk code is registered for sales entries. The sales operations done by the trained clerk do not affect sales totals. For details, refer to TRAINING MODE section.

Power save mode

s10 @ *ABCD s A

* Item:			Selection:	Entry:
	A	Entering power save mode	Yes*	0
		when time is displayed	No	1
	B-DTime(min.) to entering power save mode			001-254 or 999
		since no operation is made		(Default 030)

When 999 is set for B to D, entering into power save mode is inhibited.

Key operation example Print

s10 @

0060 sA

56