Siemens 5000 RSM Making Calls Basic Functions, Answering Calls, Answering a Call With the Handset

Making Calls – Basic Functions

Step by Step

n uor v

Speaker

uor v

Making Calls – Basic Functions

Answering Calls

Special default ring signaling is set for your telephone:

•When you receive an internal call, your telephone rings once every four seconds (single-tone sequence).

•When you receive an external call, your telephone rings twice in rapid succession every four seconds (dual-tone sequence).

•When you receive a call from the entrance tele- phone, your telephone rings three times in rapid succession every four seconds (triple-tone se- quence).

•If a call is waiting, you hear a short tone (beep) every six seconds.

The number or the name of the caller appears on the display.

Answering a Call With the Handset

The telephone rings. The caller appears on the screen.

Lift the handset.

Raise or lower the volume. Keep pressing the key until the desired volume is set.

Answering a Call with the Speaker (Speakerphone Mode)

This function is not available with

optiPoint 500 economy and optiPoint 500 basic.

The telephone rings. The caller appears on the screen.

Press the key. The LED lights up.

Speakerphone mode.

Raise or lower the volume. Keep pressing the key until the desired volume is set.

13