Siemens A31003-51730-U103-7619 Frames, No. Task, „On_Load“, „On_Message“, „On Timer“, „User“

The Elements of a DCO-Script

Frames

5.8.11Edit the attributes of the Functions of a Frame

Follow the below instructions to edit the attributes of an existing Function of a Frame:

No. Task

1.Go to the tree structure and open the node "Frames".

2.Open the parent Frame of the Function you want to edit.

3.Now open the child node "Functions" that contains the Function you want to edit.

4.Here you can choose between the child nodes:

●„On_Load“,

if you want the Function you want to edit also to be executed when the Frame is loaded, or

●„On_Message“,

if you want the new Function to be invoked by instructions of the type „Broadcast- Message“ (see Section 5.11.8, "The Instruction "BroadcastMessage""), by double- clicking on a listbox entry or by selecting an entry in a combobox,

●„On_Timer“,

if you want the new Function to be invoked cyclic depending on the interval value (see Section 5.8.1, "The attributes and child nodes of the node "Frames"") of the page or

●„User“

if you want the Function you want to edit only to be available when the Instructions of this Frame are invoked.

5.To edit the attributes of the Function, go to the list view and doubleclick the relevant item listed in the column "Value" (see Section 5.10.1, "The attributes and child nodes of Func- tions").

If needed, edit the Instructions of the Function (see Section 5.11, "Instructions").

Table 5-45 Edit the attributes of the Functions of a Frame

07/2010
OScAR-Pro Customized Operator, User Manual	5-55