Siemens A31003-51730-U103-7619 user manual Instruction GetScenarios

The Elements of a DCO-Script

Instructions

5.11.17The Instruction "GetScenarios"

Description

Use this Instruction to invoke a list of all DAKS-TT Administrator-Tooladministrated scenarios and fill the Data list with the obtained entries. Please note that the Data list is automatically cleared before it is filled with the new entries.

In this process, the system will, if available, apply the specified Filter (see Section 5.7, "Lists").

>The List invoked with this Instruction only contains scenarios for which the field "ID" was enabled.Note:

Arguments

Arguments		Description
Data list		Editable combobox to specify the Data list to which you want
		to add the obtained scenario details.
		Here you can:
		● enter the name of the Data list direct or
		● select a Data list from the list of all available Data lists of
		the data type scn_id.
Filter		Editable combobox to define the Filter that is used to limit the
		received scenarios.
		Here you can:
		● enter the name of the Filter direct or
		● select a Filter of the type SCN from the list of all available
		Filters.
Table 5-85	The arguments of the Instruction GetScenarios

Note

To output the List of all scenarios received with this command, place a List- or Combobox in the Frame and fill either or both with the command „The Instruction "SetListBoxList"“ and the afore- mentioned Data list.

07/2010
OScAR-Pro Customized Operator, User Manual	5-113