Siemens A31003-51730-U103-7619 user manual 4.3.1The tree structure of the Structure window

Operating Instructions for the OScAR-Pro Customized Operator

Setup and application of the Structure window

4.3.1The tree structure of the Structure window

The tree structure is located underneath the root (with the project name) and has the below five nodes:

●

●

●

●

●

Constants (seeSection 5.4, "Constants")

Parameters (see Section 5.5, "Parameters")

Variables (see Section 5.6, "Variables")

Lists (see Section 5.7, "Lists")

Frames (see Section 5.8, "Frames")

You can open the nodes and their child nodes by clicking and close them again by clicking

. In this way you can for example open the entry 'Frames' for a direct overview of all created Frames. When you select an entry in the tree structure its subentries are, if available, automat- ically output in the list view. For example, when you select a specific Frame its corresponding entries such as 'Parameters', 'OScAR-Pro commands templates' etc. are automatically output in the list view.

	07/2010
4-14	OScAR-Pro Customized Operator, User Manual