Siemens A31003-51730-U103-7619 user manual Add visual separators to the Main

The planning and implementation of a DCO Project

Create Frames and Controls

6.3.3Add visual separators to the "Main page"

We recommend you use the areas above and on the right hand side of the plant map for But- tons. For this reason, the areas are visually separated from the rest of the page with separator lines.

Follow the below instructions to add a separator line through the Structure window:

No.	Task				References
1.	Go to the tree view of the Structure Window and open
	the node "Frames".
2.	Now open the node "Main page" under the parent
	node "Frames", still in the tree view of the Structure
	window.
3.	Now add a new Static element with the following at-				5.8.4 Add a new Control through
	tribute values:			Horizontal Line	the Structure window
	●	Name:
	●	Left:		0
	●	Top:		80
	●	Width:		1080
	●	Height:		2
	●	Border style:		simple
	●	Border width:		1
	●	Border color:		#FF6800
4.	Now add a new Static element with the following at-				5.8.4 Add a new Control through
	tribute values:			Vertical line	the Structure window
	●	Name:
	●	Left:		1080
	●	Top:		80
	●	Width:		2
	●	Height:		944
	●	Border style:		simple
	●	Border width:		1
	●	Border color:		#FF6800
5.	Finally, click		to save the project.
6.	Next, click		to switch to the Layout window and ver-
	ify the result.
Table 6-6		Insert separator lines

07/2010
OScAR-Pro Customized Operator, User Manual	6-15