Siemens A31003-51730-U103-7619 4.4.3Move Controls, Setup and application of the Layout window

Operating Instructions for the OScAR-Pro Customized Operator

Setup and application of the Layout window

There are two ways to mark more than one element in one step:

1.Mark the first element, press the SHIFT key and keep it pressed and make a left mouse click each other element you want to mark. To delete the marking from an element simply click the element again.

2.Move the mouse cursor over your window or Frame area and find a place where it does not collide with any other element. Then press the left mouse key, keep it pressed and pull a bounding box around the elements you want to mark. Now release the mouse key. Every element that is completely surrounded by the bounding box is marked:

4.4.3Move Controls

There are two ways to move one or several Controls:

1.Mark the elements you want to move and use the arrow keys () to shift them to the new position. Each time you press an arrow key the elements are shifted in increments of one pixel. To increase these increments to five pixels, simply press the SHIFT key to- gether with the arrow key.

2.Mark the elements you want to move to a new position and move the mouse cursor over

one of the marked elements. This will change the mouse cursor to . Now press the left mouse key and keep it pressed. The elements can now be moved to the new position.

07/2010
OScAR-Pro Customized Operator, User Manual	4-19