Siemens A31003-51730-U103-7619 5.7.7Add a new Filter, 5.7.8Edit the attributes of a Filter, Lists

The Elements of a DCO-Script

Lists

5.7.7Add a new Filter

Follow the below instructions to create a new Filter:

No.	Task
1.	Go to the tree structure and open the node "Lists".
2.	Now open the child node "Filters".
3.	Now go to the menu bar and select "EditNew".
	This will open the below user window to add the new process Filter.
4.	Enter a name for the Filter that is clear and unique.
5.	Specify the data type of the Filter.

6.Finally, click Ok to close the window.

The DCO-Designer outputs the newly created Filter in the tree structure of the Structure window, and there in the "Filters" child node of the node "Lists".

If needed you can now edit the attributes of the Filters entries in the subordinate child nodes "ID ranges", "Included IDs" and "Excluded IDs".

Table 5-26 Create the Filter

5.7.8Edit the attributes of a Filter

Follow the below instructions to edit an existing Filter:

No.	Task
1.	Go to the tree structure and open the node "Lists".
2.	Now open the child node "Filters" in the tree.
3.	In the tree view, select the filter that you want to edit.
4.	To edit the attributes, go to the list view and doubleclick the relevant item listed in the
	column "Value".
Table 5-27		Edit the attributes of Filters

	07/2010
5-28	OScAR-Pro Customized Operator, User Manual