Siemens A31003-51730-U103-7619 user manual Toolbar and Controls, Control Description

Operating Instructions for the OScAR-Pro Customized Operator

Setup and application of the Layout window

4.4.1Toolbar and Controls

The toolbar is usually located at the right hand side of your screen. If you want it to float freely above your window or anchor at any of the other three sides of your screen, simply make a mouse click on the upper end of the toolbar, keep the mouse key pressed and drag it to the new position.

The actual Frame area is located on the gray background screen of the Layout window. It is within the dimensions of this area that you can place Controls.

By definition, Controls are elements that represent a something further and/or enable you to actually realize the functions of your interface.

The Layout window includes the following Controls:

Control		Description
Static element		A 'Static element' serves to place graphics giving information
		as well as texts on your interface.
Edit field		An 'Edit field' enables the later user (Operator) to enter alpha-
		nu-meric and/or numeric information.
Button		A 'Button' can set specific modes and trigger events. It can be
		compared to a switch.
Checkbox		A 'Checkbox' exclusively serves to set specific modes.
Listbox		A 'Listbox' outputs lists in which the user can mark individual
		entries.
Combobox		A 'combobox' serves to give a choice of options from with the
		user (Operator) can select exactly one entry.
Table 4-3	Summary of all available Controls

Both the Controls that are placed in a Frame and the Frame area itself can be modified in terms of size. Also, you can move Controls to a new place or have them aligned or positioned auto- matically.

07/2010
OScAR-Pro Customized Operator, User Manual	4-17