Siemens A31003-51730-U103-7619 user manual 4.4.5Align and space elements automatically

Operating Instructions for the OScAR-Pro Customized Operator

Setup and application of the Layout window

4.4.5Align and space elements automatically

The DCO-Designer makes it possible to align elements easily with another elements:

To do so, mark at least two objects, go to the menu bar and open "LayoutAlign", and select the way in which you want to align the objects ("Top", "Left", "Right", "Bottom", "Horiz. center", "Vert. center"). The DCO-Designer will align the marked objects with the elements that has the focus.

Just as easily you can also space elements evenly:

To do so, mark at least three objects, go to the menu bar and open "LayoutSpace evenly" and select the way in which you want to space the objects ("Across", "Down"). The DCO-De- signer will evenly space the marked elements:

●"Across", i.e. horizontally from side to side between the outer left and the outer right ele- ment,

●"Down", i.e. vertically from top to bottom between the highest and the lowest element.

07/2010
OScAR-Pro Customized Operator, User Manual	4-21