Siemens A31003-51730-U103-7619 4.4.2Mark a Frame area or a Control, Button, Description

Operating Instructions for the OScAR-Pro Customized Operator

Setup and application of the Layout window

4.4.2Mark a Frame area or a Control

Before you can edit a Frame area or a Control, you need to mark the corresponding element (Frame area or Control). For Controls you also have the option to edit several Controls at the same time.

The below table illustrates the different ways in which marked elements are output on the screen using the example of marked and unmarked Buttons:

Button	Description
Not marked	The element is neither marked nor surrounded by an extra
	frame.
One Button marked:	If only one Button is marked it is surrounded by a frame with
	accented edges and squares both at its corner points and in
	the center of each line.
More than one Button	If two or more Buttons are marked, each button is surrounded
marked:	by a frame that has accented edges but no squares. The But-
	ton that has the focus has an additional solid black frame on
	the inside of the accented frame.

Table 4-4 Rendition of marked objects

To mark only one element simply make a left mouse click on the element. This will give the el- ement the bounding box.

	07/2010
4-18	OScAR-Pro Customized Operator, User Manual