Siemens A31003-51730-U103-7619 5.8.10Add a new Function to a Frame, „On_Load“, „User“, Frames

The Elements of a DCO-Script

Frames

5.8.10Add a new Function to a Frame

Follow the below instructions to add a new Function to a Frame:

No. Task

1.Go to the tree structure and open the node "Frames".

2.Open the Frame to which you want to add a new Function.

3.Under the Frame you selected, open the child node "Functions" to add a new Function.

4.Here you can choose from the nodes

●„On_Load“,

if you want the new Function to be executed whenever the Frame is loaded, or

●„On_Message“,

if you want the new Function to be invoked by instructions of the type „Broadcast- Message“ (see Section 5.11.8, "The Instruction "BroadcastMessage""), by double- clicking on a listbox entry or by selecting an entry in a combobox,

●„On_Timer“,

if you want the new Function to be invoked cyclic depending on the interval value (see Section 5.8.1, "The attributes and child nodes of the node "Frames"") of the page or

●„User“

if you want the new Function you want to create only to be available when the In- structions of this Frame are invoked.

5.Now go to the menu bar and select "EditNew".

This will open the below user window to add the new process Filter.

6.Enter a name for the new Function that is clear and distinct in this Frame.

7.Finally, click Ok to close the window.

The DCO-Designer outputs the new Function in the tree structure of the Structure win- dow, and there in the child nodes "On_Load", "On_Message", "On_Timer"or "User".

If needed, you can now edit the attributes of the new Function and its Instructions.

Table 5-44 Add a new Function to a Frame

	07/2010
5-54	OScAR-Pro Customized Operator, User Manual