Siemens MC35 - page 112

AT Command Set

MC35_ATC_01_V05.00 Page 112 of 256 15.07.2002

PH-NET PIN ME is waiting for network personalisation pass-

word

PH-NET PUK ME is waiting for network personalisation un-

blocking password

PH-NS PIN ME is waiting for network subset personalisation

password

PH-NS PUK ME is waiting for network subset unblocking

password

PH-SP PIN ME is waiting for service provider personalis a-

tion password

PH-SP PUK ME is waiting for service provider personalisa-

tion unblocking password

PH-C PIN ME is waiting for corporate personalisation

password

PH-C PUK ME is waiting for corprorate personalisation un-

blocking password

See Chapters 4.21 and 8.13 for information on lock types.

Write command

AT+CPIN=<pin>

[,<new pin>]

Response

The write command lets the ME store the entered password. This ma y be for

example the SIM PIN1 to register to the GSM network, or the SIM PUK1 to re-

place a disabled PIN with a new one, or the PH-SIM PIN if the client has taken

precautions for preventing damage in the event of loss or theft etc. See above

for the list of passwords.

If error is related to ME functionality:

+CME ERROR: <err>

If no PIN request is pending (for example if PIN authentication has been done

and the same PIN is entered again) ME responds +CME ERROR: operation not

allowed. No action is required from your part.

Parameter

<pin> password (string type), usually SIM PIN1.

If the requested password was a PUK, such as SIM PUK1 or PH-

SIM PUK or PH-FSIM PUK or another password, then <pin> mus t

be followed by <newpin>.

<new pin> if the requested code was a PUK: specify a new password or re-

store the former disabled password. See Chapter 4.35.1 for more

information about when you may need to enter the PUK.

Reference

GSM 07.07

Note

· Caution: After entering a password with AT+CPIN all other commands that

need access to data on the SIM card may be blocked for up to 20 seconds!

· Successful PIN authentication only confirms that the entered PIN was rec-

ognized and correct. The output of the result code OK does not necessarily

imply that the mobile is registered to the desired network.

Typical example: PIN was entered and accepted with OK, but the ME fails

to register to the network. This may due to missing network coverage, de-

nied network access with currently used SIM card, no valid roam ing agree-

ment between home network and currentl

available o

erators etc.