AT Command Set
MC35_ATC_01_V05.00 Page 127 of 256 15.07.2002
Test command
AT+CRSM=?
Response
OK
Write command
AT+CRSM=<com
mand>[,<fileId>
[,<P1>,<P2>,<P3>
[,<data>]]]
By using this command the TE has access to the SIM database. SIM ac cess is
restricted to the commands which are listed below.
As response to the command the ME sends the current SIM information pa-
rameters and response data. ME error result code +CME ERROR may be re-
turned when the command cannot be passed to the SIM, but failure in the exe-
cution of the command in the SIM is reported in <sw1> and <s w2> parameters.
Response
+CRSM: <sw1>, <sw2> [,<response>]
OK / ERROR / +CME ERROR: <err>
Parameter
<command> 176 READ BINARY
178 READ RECORD
192 GET RESPONSE
214 UPDATE BINARY
220 UPDATE RECORD
242 STATUS
all other values are reserved; refer GSM 11.11.
<fileId> integer type; this is the identifier for an elementary
data file on SIM. Mandatory for every command ex-
cept STATUS
<P1>,<P2>,<P3> integer type, range 0 - 255
parameters to be passed on by the ME to the SIM; re-
fer GSM 11.11.
<data> information which shall be written to the SIM (hexa-
decimal character format)
<sw1>, <sw2> integer type, range 0 - 255
status information from the SIM about the execution
of the actual command. These parameters are deliv-
ered to the TE in both cases, on successful or failed
execution of the command; refer GSM 11.11.
<response> response of a successful completion of the command
previously issued (hexadecimal character format)
Reference
GSM 07.07
GSM 11.11
Note