Siemens MC35 1 Introduction

AT Command Set

MC35_ATC_01_V05.00 Page 13 of 256 15.07.2002

1 Introduction

This document presents the AT Command Set for the Siemens cellular en gines

MC35 Module

MC35 Terminal

The AT commands detailed in this document are supported by both products. W here differences oc-

cur, they are noted in the chapter that refers to the command. In the present version, the only excep-

tions concern these commands:

Table 1: Product specific use of AT commands

AT command MC35 Module MC35 Terminal

AT+CALA, Chapter 4.2 Alarm mode and reminder call

fully applicable

Does not support Alarm mode.

Please ignore any information relat-

ing to the subject.

The reminder call can be used as

described.

AT^SSYNC, Chapter 8.40 SYNC pin may be assigned dif-

ferent functions: <mode> 0 or 1.

SYNC pin supports only <mode>=1

(LED status).

AT^SBC, Chapter 8.5 All functions fully applicable

Command not applicable.

MC35 and MC35 Terminal feature basic SIM Application Toolkit (SAT) functionali ty which enables SIM

cards to run additional network based applications, such as value a dded services, online banking, in-

formation services etc. To give you an idea, Chapter 7 provides a br ief overview. In greater detail, the

SAT functions and the required AT commands are described in [4].