AT Command Set
MC35_ATC_01_V05.00 Page 215 of 256 15.07.2002
8.31 AT^SPBS Steps the selected phonebook alphabetically
This command can be used to flick through the active phonebook recor ds in alphabetical order by
name.
CAUTION: The AT^SBPS command is intended for reading only. For example, it helps you find en-
tries starting with matching characters. However, do not use the listed index n umbers to dial out or
modify entries.
Test command
AT^SPBS=?
Response
^SPBS: (list of supported <value>s)
OK
Parameter
See write command
Write command
AT^SPBS=
<value>
Parameter
<value> 1 to make a step down ward in the alphabetically sorted phonebook
2 to make a s tep upward in the alphabetically sorted phonebook
Response
If <value>=1
TA steps down one entry.
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>
^SPBS: <index4>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If <value>=2 (after <value>=1)
TA steps up one entry.
^SPBS: <index1>,<number>,<type>,<text> <CR,LF>
^SPBS: <index2>,<number>,<type>,<text> <CR,LF>
^SPBS: <index3>,<number>,<type>,<text> <CR,LF>,<CR,LF>
OK
If error is related to ME functionality:
+CME ERROR: <err>
The response parameters are explained in the specification of the “AT^SPBG”
command.
Reference
Siemens
Note
This command can be used for the ME, SM and FD phonebook.