AT Command Set
MC35_ATC_01_V05.00 Page 220 of 256 15.07.2002
Test command
AT^SPWD=?
Response
^SPWD: (list of supported (<fac>, <pwdlength>)s) OK
If error is related to ME functionality:
+CME ERROR: <err>
Parameter
<fac> “P2” PIN2
otherwise see write command without “FD”
<pwdlength> integer, max. length of password
Write command
AT^SPWD =
<fac>, <oldp-
wd>,<newpwd>
Parameter
<fac> Phone security passwords
“SC” SIM card (PIN)
“P2” PIN 2
“PS” Phone locked to SIM (device code)
Factory set locks
“PF” lock Phone to the very first SIM card
“PN” Network Personalisation
“PU” Network subset Personalisation
“PP” Service Provider Personalisation
“PC” Corporate Personalisation
Supplementary Service: Call barring
“AO” BAOC ( Bar All Outgoing Calls)
“OI” BOIC ( Bar Outgoing International Calls)
“OX” BOIC-exHC (Bar Outg oing International Calls except to Home
Country)
“AI” BAIC ( Bar All Incoming Calls)
“IR” BIC-Roam ( Bar Incoming Calls when Roaming outside the
home country)
“AB” All Barring services
“AG” All outGoing barring services
“AC” All inComing barring services
Note: All call barring types have usually the same ME <password> to
lock and unlock. The default <password> is supplied from the net work
provider. TA sets a new password for the facility lock function.
<oldpwd> Password specified for the facility from the user interf ace or with
command.
Can be ignored if no old password was allocated to the facility. Tak e
into account that a password may have already been set by factory,
or that the service is sub
j
ect to a
p
assword issued b
y
the
p
rovider.