Siemens MC35 - page 223

AT Command Set

MC35_ATC_01_V05.00 Page 223 of 256 15.07.2002

Execute Command

AT^SRTC

The Execute command is intended for testing. It starts to play a mel-

ody from the audio output currently selected with the AT^SNFS com-

mand.

Response

To stop the test use AT^SRTC again. During test playback, you can

enter the Write command to select another melody and adjust the

volume. Also, you can enter the Read command to check the type

and volume of the current ringing tone, and to view the status of play-

back (on / off).

The test ringing signal cannot be activated when an MTC is ringing

(ERROR).

If an MTC arrives during test playback, test ringing stops and “normal“

ringing is activated (RING).

Selecting <vol>=0 during the test, immediately stops playback. After

this, ringing tones will be muted until you change <vol> using the

Write command.

Reference

SIEMENS