Assembly | en |
|
Check the Tires
Check the air pressure in the tires. Tires with too much air pressure will cause the unit to ride rough. Also, the wrong air pressure will keep the mower deck from cutting level. The correct air pressure is: Front Tires 0,97 BAR (14 PSI), Rear Tires 0,69 BAR (10 PSI). The tires were over inflated for shipment.
Check the Level of the Mower Deck
Make sure the level of cut is still correct. After you mow a short distance, look at the area that was cut. If the mower deck does not cut level, see an
authorized dealer.
Prepare the Engine
NOTE: The engine was shipped from the factory filled with oil. Check the level of the oil. Add oil as needed.
WARNING
Follow the engine manufacturer’s instructions for the type of fuel and oil to use. Always use a safety fuel container. Do not smoke when adding fuel to the engine. When inside an enclosure, do not fill with fuel. Before you add fuel, stop the engine. Let the engine cool for several minutes.
Assemble the Fuel Cap
The fuel cap will be shipped in the Parts Bag and tape will be placed over the fuel tank opening during shipment. Before operation, remove tape from opening on fuel tank and install fuel cap.
See the engine manufacturer’s instructions for the type | ||
| Reproduction | |
of fuel and oil to use. Before you use the unit, read the | ||
information on safety, operation, maintenance, | for | |
and storage. |
|
|
| Not |
|
16