Allabsolute values you enter must be within the commandtarget range, andall adjustment values
mustequal a numberwit hint hec ommandtarget range.
Seethe following example for adjustingprojector brightness:
>get brightness
brightness=55
>set brightness=65
brightness=65
>set brightness+5
brightness=70
>set brightness-15
brightness=55
Video sourcespecification values
Youcan use the source input field describedin Source selection controls onnext pagein a command
toset anabsolute value oradjustment value to a source othert hanthe active s ource.You can do this
whilethe selected source is inactive, but the source device must be connected, or you receivean
invalidcommand response.
Theoperationalparametersare VGA1, Composite or S-Video.
Thefollowing examples set the brightnessof VGA1,regardless of whetherit’s thec urrentsource or
not:
>set brightness vga1=65
brightness vga1=65
>set brightness vga1-7
brightness vga1=58
AP P E N D I X A
Remotelymanaging your intera ctivewhiteboar d system
57