Thesecommands controlt heappearanceof y oursource. These settings are unavailablewhen the
projectoris in Standbymode orw henthe sourceis disc onnected.See Value-basedcommand
methodson page56 for setting absolute andadjustment commands.
Command Command targetrange Response
setdisplaymode [target] =SMART Presentation
=BrightClassroom
=DarkC lassroom
=sRGB
=User
displaymode=[target]
setbrightness [value] =0to = 100 brightness=[value]
setc ontrast[ value] =0to = 100 contrast=[value]
setw hitepeaking[value] =0to =10 whitepeaking=[value]
setdegamma [value] =0 to =3 degamma=[value]
setred [value] =0to = 100 red=[value]
setgreen [value] =0to = 100 green=[value]
setblue [value] =0to = 100 blue=[value]
setc yan [value] =0to = 100 cyan=[value]
setmagenta [value] =0to =100 magenta=[value]
sety ellow [value] =0to = 100 yellow=[value]
setv ideofreeze[target] =on
=off
videofreeze=[target]
AdditionalVGA sourcecontrols
YourVGA source supports all the generalsource controlsdescribed in Generalsource controls on
previouspage,as wellas thecommands listed in this section. These settings are unavailablewhen
theprojector is in Standby modeor when the VGA sources are disconnected.
NN O T E
Someof these commands areinvalid wit h compositev ideosources.
Thesecommands informy ouof thecurrent VGA source settings.
Command Response
getfrequency frequency=[currentfrequency setting]
gettracking tracking=[currenttracking setting]
getsaturation saturation=[currentsaturation setting]
gettint tint=[currenttint setting]
getsharpness sharpness=[currentsharpness setting]
AP P E N D I X A
Remotelymanaging your intera ctivewhiteboar d system
60