SMC Networks SMCWHSG44-G manual

1.8.3.2. Router with a DHCP-Based DSL/Cable Connection

Fig. 13. TCP/IP settings for Router with a DHCP-Based

DSL/Cable Connection mode.

If the SMCWHSG44-Gis set to be in 'Router with a DHCP-Based DSL/Cable Connection 'mode, two IP addresses are needed-one for the Ethernet LAN interface and the other for the WAN interface. The LAN IP address must be set manually to a private IP address, say 192.168.2.xxx. The default LAN IP address is 192.168.2.1 and the default subnet mask is 255.255.255.0. In most cases, these default settings need no change.

As for the WAN IP address, it is obtained by DHCP from the ISP. The Trigger mode setting affects the behavior of the DHCP client of the Router. In Auto mode, you don't have to worry about the DHCP process; the device takes care of everything. In Manual mode, there are two buttons on the Start page for you to manually release an obtained IP address (Release) and re-obtain a new one from a DHCP server (Renew).

1.8.3.3. Router with a Static-IP DSL/Cable Connection

Fig. 14. TCP/IP settings for Router with a Static-IP

DSL/Cable Connection mode.

If the SMCWHSG44-Gis set to be in 'Router with a Static-IP DSL/Cable Connection' mode, two IP addresses are needed-one for the Ethernet LAN interface and the other for the WAN interface. The LAN IP address must be set manually to a private IP address, say 192.168.2.xxx. The default LAN IP

29

Image 30

SMC Networks SMCWHSG44-G manual Router with a DHCP-Based DSL/Cable Connection, Router with a Static-IP DSL/Cable Connection

Contents

SMCWHSG44-G Page Copyright Trademarks Limited Warranty Page Federal Communication Commission Interference Statement FCC Radiation Exposure StatementIndustry Canada Class B EC Conformance Declaration Safety Compliance Power Cord Safety Schuko Page Wichtige Sicherheitshinweise Germany Schuko Page Table of Contents System Page SMCWHSG44-G SMCWHS-POS Introduction Overview Features User Authentication, Authorization, and Accounting AAAIeee 802.11b/g Compliant Wireless Operation Internet Connection Sharing Network Security Firmware Tools Package Checklist LED DefinitionRear Panel Selecting a Power Supply Method POE enabled LAN Port Position Mounting the SMCWHSG44-G on a Wall Preparing for Configuration Changing the TCP/IP Settings of the Managing Computer Configuring the SMCWHSG44-G Entering the Password Setup Wizard Selecting an Operational Mode HomePage Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable Connection Router with Multiple DSL/Cable Connections Setup Wizard Configuring Dhcp Server Settings Setup Wizard Configuring Ieee 802.11 Settings Configuring User Authentication Settings Web Redirection Local Authentication Sever Authentication protocolPage How to Setup the Mini-POS Ticket Printer Account Table List Ieee Configuring Radius Settings Radius Settings Allowable Authentication Modes Setting up Client Computers Deploying the SMCWHSG44-G Configuring Ieee 802.11-Related Settings To establish a wireless link to an APConfiguring TCP/IP-Related Settings Page Authentication Success Overview Menu StructureLogout Page Save, Save & Restart, and Cancel Commands Home and Refresh CommandsStatus Associated Wireless Clients Authenticated Users Account Table Session List Managed LAN Devices Specifying Operational Mode System Changing Password Managing Firmware Backing up and Restoring Configuration Settings by Http To upgrade firmware of the SMCWHSG44-G by HttpUpgrading Firmware by Http To upgrade firmware of the SMCWHSG44-G by Tftp Upgrading Firmware by Tftp Backing up and Restoring Configuration Settings by Tftp To back up configuration of the SMCWHSG44-G by Tftp To restore configuration of the SMCWHSG44-G by Tftp Resetting Configuration to Factory Defaults Configuring TCP/IP Related Settings AddressTime Zone Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable Connection DNS DNS Proxy Host Address Resolution NAT Basic To expose preset internal servers Virtual Server MappingsDhcp Server Dhcp Server Basic Ii. Static Dhcp Mappings Dhcp Relay Load BalancingTo always assign an IP address to a specific Dhcp client Zero Client Reconfiguration Configuring Ieee 802.11-Related Settings Wireless Basic Wireless Distribution System Wireless Distribution System Settings To enable a WDS link Security Network Topology Containing a LoopPage MAC-Address-Based Access Control MAC-Address-Based Access Control Settings To deny wireless clients access to the wireless network To grant wireless clients access to the wireless networkIeee 802.1x/RADIUS Ieee 802.1x/RADIUS Settings Configuring Authentication Settings AAA Basic Default Authentication Failure Warning Unrestricted Clients To specify an uncontrolled computer by MAC address Walled Garden Radius Basic Robustness Authentication Session Control Log-On Page Customization Settings Authentication Success Page Customization Settings Advertisement Links Settings Ddns Icmp TCP UDP Vlan FirewallTo set a rule for packet filtering URL Filters Management BasicTo block Http traffic to an unwelcome Web site UPnP System Log Access Rules Snmp Unrestricted Host MAC Address Settings LAN Device Management Example for LAN Device Management To specify a LAN device to manage Default Settings Appendix a LED Definitions TCP/IP Setting Problems Page Wireless Settings Problems Other Problems Appendix C Distances and Data Rates Configuration and Management Network ConfigurationTransmission output Power Standards Keypad Basic Service Set BSS Access PointAuthentication Ad Hoc Extensible Authentication Protocol EAP Dynamic Host Configuration Protocol DhcpExtended Service Set ESS Encryption Infrastructure Inter Access Point Protocol IappPower over Ethernet PoE Local Area Network LAN Wi-Fi Protected Access Service Set Identifier SsidWireless Distribution System WDS Session Key Wired Equivalent Privacy WEP WPA Pre-shared Key PSKPage For Technical SUPPORT, Call