2.8.2.4. SNMP

Fig. 107. SNMP Settings.

The SMCWHSG44-G can be managed by SNMP (Simple Network Management Protocol). You can specify the name (used as a password) of the read-only and read-write community. In addition, up to 5 SNMP trap targets can be set in the SNMP Trap table.

To specify a trap target:

1.Type the IP address of the target host.

2.Type the Community for the host.

3.Select the corresponding check box next to the IP address text box.

2.8.3. Access Rules

Fig. 109. Access Rules Settings.

The SMCWHSG44-G provides the 'Access Rules' to permit/deny the wireless users access in specified date/time frame.

To specify the SMCWHSG44-G access rule with the date/time frame:

1.Select the Column of the Date / Time Access Rule Table (default all columns are 'Permitted'), the specified column will be 'Denied' and turn to white.

2.Continue step 1 until all preferred Date/Time column specified to be 'Denied'.

82

Page 83
Image 83
SMC Networks SMCWHSG44-G manual Snmp, Access Rules