SMC Networks SMCWHSG44-G instruction

address is 192.168.2.1 and the default subnet mask is 255.255.255.0. In most cases, these default settings need no change.

As for the WAN IP address, it must be manually set. Consult your ISP for the correct IP address, Default gateway, Subnet mask, Primary DNS server, and Secondary DNS server settings.

1.8.3.4. Router with Multiple DSL/Cable Connections

Fig. 15. TCP/IP settings for Router with Multiple

DSL/Cable Connections mode.

Since the Internet connection can be PPPoE-based, DHCP-based, or Static- IP-based, the addressing settings of each WAN interface are the same as those of 'Router with a PPPoE-Based DSL/Cable Connection', 'DHCP-Based DSL/Cable Connection', or 'Router with a Static-IP DSL/Cable Connection', respectively. As a result, refer to Sections 1.8.3.1, 1.8.3.2, and 1.8.3.3 for more information.

30

Image 31

SMC Networks SMCWHSG44-G manual Router with Multiple DSL/Cable Connections

Contents

SMCWHSG44-G Page Trademarks Copyright Limited Warranty Page FCC Radiation Exposure Statement Federal Communication Commission Interference StatementIndustry Canada Class B EC Conformance Declaration Power Cord Safety Safety Compliance Schuko Page Wichtige Sicherheitshinweise Germany Schuko Page Table of Contents System Page SMCWHSG44-G SMCWHS-POS Introduction User Authentication, Authorization, and Accounting AAA Overview FeaturesIeee 802.11b/g Compliant Wireless Operation Internet Connection Sharing Network Security Firmware Tools LED Definition Package ChecklistRear Panel POE enabled LAN Port Position Selecting a Power Supply Method Mounting the SMCWHSG44-G on a Wall Changing the TCP/IP Settings of the Managing Computer Preparing for Configuration Entering the Password Configuring the SMCWHSG44-G Home Setup Wizard Selecting an Operational ModePage Router with a Static-IP DSL/Cable Connection Router with a DHCP-Based DSL/Cable Connection Router with Multiple DSL/Cable Connections Setup Wizard Configuring Ieee 802.11 Settings Setup Wizard Configuring Dhcp Server Settings Web Redirection Configuring User Authentication Settings Authentication protocol Local Authentication SeverPage Account Table List How to Setup the Mini-POS Ticket Printer Ieee Radius Settings Allowable Authentication Modes Configuring Radius Settings Deploying the SMCWHSG44-G Setting up Client Computers To establish a wireless link to an AP Configuring Ieee 802.11-Related SettingsConfiguring TCP/IP-Related Settings Page Authentication Success Menu Structure OverviewLogout Page Home and Refresh Commands Save, Save & Restart, and Cancel CommandsStatus Associated Wireless Clients Account Table Authenticated Users Managed LAN Devices Session List System Specifying Operational Mode Managing Firmware Changing Password To upgrade firmware of the SMCWHSG44-G by Http Backing up and Restoring Configuration Settings by HttpUpgrading Firmware by Http Upgrading Firmware by Tftp To upgrade firmware of the SMCWHSG44-G by Tftp To back up configuration of the SMCWHSG44-G by Tftp Backing up and Restoring Configuration Settings by Tftp To restore configuration of the SMCWHSG44-G by Tftp Configuring TCP/IP Related Settings Address Resetting Configuration to Factory DefaultsTime Zone Router with a DHCP-Based DSL/Cable Connection Router with a Static-IP DSL/Cable Connection DNS DNS Proxy NAT Basic Host Address Resolution Virtual Server Mappings To expose preset internal serversDhcp Server Ii. Static Dhcp Mappings Dhcp Server Basic Load Balancing Dhcp RelayTo always assign an IP address to a specific Dhcp client Configuring Ieee 802.11-Related Settings Wireless Basic Zero Client Reconfiguration Wireless Distribution System To enable a WDS link Wireless Distribution System Settings Network Topology Containing a Loop SecurityPage MAC-Address-Based Access Control Settings MAC-Address-Based Access Control To grant wireless clients access to the wireless network To deny wireless clients access to the wireless networkIeee 802.1x/RADIUS Ieee 802.1x/RADIUS Settings Configuring Authentication Settings AAA Basic Default Authentication Failure Warning To specify an uncontrolled computer by MAC address Unrestricted Clients Radius Basic Walled Garden Robustness Log-On Page Customization Settings Authentication Session Control Authentication Success Page Customization Settings Ddns Advertisement Links Settings Icmp TCP UDP Firewall VlanTo set a rule for packet filtering Management Basic URL FiltersTo block Http traffic to an unwelcome Web site System Log UPnP Snmp Access Rules LAN Device Management Unrestricted Host MAC Address Settings To specify a LAN device to manage Example for LAN Device Management Appendix a Default Settings LED Definitions TCP/IP Setting Problems Page Other Problems Wireless Settings Problems Appendix C Distances and Data Rates Standards Network ConfigurationTransmission output Power Configuration and Management Keypad Ad Hoc Access PointAuthentication Basic Service Set BSS Encryption Dynamic Host Configuration Protocol DhcpExtended Service Set ESS Extensible Authentication Protocol EAP Local Area Network LAN Inter Access Point Protocol IappPower over Ethernet PoE Infrastructure Session Key Service Set Identifier SsidWireless Distribution System WDS Wi-Fi Protected Access WPA Pre-shared Key PSK Wired Equivalent Privacy WEPPage For Technical SUPPORT, Call