EC Conformance Declaration

SMC contact for these products in Europe is:

SMC Networks Spain S.L.,

Edificio Conata II,

Calle Fructuós Gelabert 6-8, 2o, 4a,

08970 - Sant Joan Despí,

Barcelona, Spain.

Signed and dated Copy of the Declaration of Conformity can be found in the product section of www.smc-europe.com

This RF product complies with R&TTE Directive 99/5/EC. For the evaluation of the compliance with this Directive, the following standards were applied:

Electromagnetic compatibility and radio spectrum matters (ERM) EN300 328-1 (2001-12)

EN300 328-2 (2001-12)

Electromagnetic Compatibility (EMC) Standard for radio equipment and services EN301 489-1 V1.4.1 : 2002

EN301 489-17 V1.2.1 : 2002

Safety Test EN60950-1 : 2001

The conformity assesment procedure referred to in Article 10 and detailed in Annex IV of the Directive 1999/5/EC has been followed related to Articles

3.2 with the involvement of the following Notified Body:

BTS-ETZ Certification GmBH, Storkkower Strasser 38c, D-15562, Reichenwalde B, Berlin, Germany

Identification Mark

Countries of Operation & Conditions of Use in the European Community This device is intended to be operated in all countries of the European Community. Requirements for indoor vs. outdoor operation, license requirements and allowed channels of operation apply in some countries as described below: Note: The user must use the configuration utility provided with this product to ensure the channels of operation are in conformance with the spectrum usage rules for European Community countries as described below.

This device requires that the user or installer properly enter the current country of operation in the command line interface as described in the user guide, before operating this device.

This device will automatically limit the allowable channels determined by the current country of operation. Incorrectly entering the country of operation may result in illegal operation and may cause harmful interference

6

Page 7
Image 7
SMC Networks SMCWHSG44-G manual EC Conformance Declaration