Operations 3 Chapter

Monitoring Audio

Use the internal speakers or the connected headphones to monitor the audio input to the unit or the audio output from the unit.

Determining the Audio Signal Output Destinations

Select which output destinations to which the audio assigned for each channel fader should be routed. For the output destination, you can select the PGM output connectors, AUX output connectors, or MIX output connectors.

Output from the PGM output connectors

1 Press the ACCESS button in the same column of the channel fader to which the audio you want to be the program output is assigned.

2 1 In the top menu, select [PGM OUT]; 2 select [On], and confirm.

12

Limiter/Compressor

Off

Off

Pan

CNT

B On

PGM OUT

On

 

AUX1 OUT

Off

 

AUX2 OUT

Off

 

3 Press the ESC button to close the ACCESS menu.

Note

You can also close the menu by pressing the same ACCESS button again.

Output from the AUX output connectors

This unit has two sets of AUX output connectors (AUX1, AUX2), and you can create a mix balance with levels different from those of the PGM/MIX output.

1 Press the ACCESS button in the same column of the channel fader to which the audio you want to be the AUX output is assigned.

2 1 In the top menu, select [AUX1 OUT] or [AUX2 OUT]; 2 in the submenu, select [Pre-Fader] or [Post-Fader], and confirm.

12

Pan

CNT

Off

 

 

 

PGM OUT

On

Pre-Fader

 

 

 

AUX1 OUT

Off

Post-Fader

 

 

 

AUX2 OUT

Off

Send Level

0dB

 

MIX OUT

On

 

 

 

 

 

 

 

 

 

 

The significance of the items is as follows.

[Pre-Fader]:Output the audio before adjustment by the channel faders. In this case, the audio is output even when the CH ON button is Off.

[Post-Fader]:Output the audio after adjustment by the channel faders.

156 Monitoring Audio