The upper USB connector is number 1, and the lower connector is number 2.
In the top menu, select [File Manager].
Press the MENU button.
2
3
4 1 Select [Import CG File] and confirm; 2 Select [Memory Stick], [USB Flash Memory 1], or [USB Flash Memory 2] and confirm; 3 Select the graphics file to be imported and confirm.
For details of formatting a “Memory Stick,” see the section, “Formatting a “Memory Stick”” (page 181), and for details of formatting a USB flash memory, see the section, “Formatting a USB Flash Memory” (page 183).

Operations 3 Chapter

1

2

 

3

 

 

 

 

 

 

 

 

Delete

Memory Stick

 

All

Disconnect

USB Flash Memory 1

XXXXXXXX.targa

Recover

USB Flash Memory 2

XXXXXXXX.targa

Export Job

 

 

XXXXXXXX.targa

Import Job

 

 

 

Import CG File

 

 

 

Import Logo File

 

 

 

 

 

 

 

Note

If you select [All] in step 3, all of the files are imported.

Caution

Characters other than alphanumeric characters cannot be displayed correctly.

This imports the graphics file.

When the import is completed, a completion message appears.

5 Press the ENTER button.

6 Press the MENU button to close the menu.

Note

The imported graphics file can be used in “Using the Downstream Key (DSK) Function to Add Text or an Image” (page 78) or “Using Luminance Keying” (page 84).

Importing Logo Files

By importing a logo file to the internal hard disk, you can display an image (logo) for the purpose of copyright protection.

1 Insert the “Memory Stick” or USB flash memory holding the logo file in the “Memory Stick” slot or USB connector in the side panel.

Cautions

•Use a “Memory Stick” or USB flash memory that has been formatted using this unit.

•The logo file must have been placed in the designated folder MSSONY/ PRO/LPS/ANYCAST/LOGO for logo files.

176 Importing and Deleting Files