Preparations 2 Chapter

3 1 Select the number of the MIC/LINE input connector to which is connected the target audio signal, and confirm; 2 select [High(+4dB)], and confirm.

In this example, both [MIC/LINE 1] and [MIC/LINE 2] are set to [High (+4dB)].

12

 

 

 

 

 

MIC/LINE 1

Middle

 

B High(+4dB)

 

MIC/LINE 2

Middle

Middle(-20dB)

MIC/LINE 3

Middle

Low(-44dB)

MIC/LINE 4

Middle

 

 

MIC/LINE 5

Middle

 

 

MIC/LINE 6

Middle

 

 

 

 

 

 

 

4 Press the MENU button to close the menu.

If no input signal indication appears (when set to the default microphone/line level of “Middle (-20 dB)”)

If no input signal indication appears in the source viewer even though an audio signal is input, the microphone/line level is not reaching the reference level. Using the same procedure as detailed in “If the peak indication appears” above, select the number of the microphone/line input connector, and at step 3-2, select [LOW (-44dB)], and confirm.

62

Settings Related to Input Signals