
Press the 1 power button on the side panel.
The following message appears, the text typing tool software ends, and the power is turned off.
Caution
If there is a file in the process of creation, the program will end without saving it.
To close the text typing tool software and start the Anycast Station main software
1 Click the [Exit] button at the lower left of the screen.
The screen goes black and the Anycast Station main software starts.
Note
You can also use the keyboard F5 (Fn+5) key to switch to the Anycast
Station main software.
In this case, following confirmation message appears.
If a file is being created, a message appears to confirm whether to save the file.
2 Click the [Enter].
Standard OperationsThis section describes standard operations used as various points in the text typing tool software.
Mouse operations•By connecting a USB mouse to the USB connector on the side panel, you can carry out mouse operations.
•You can also carry out mouse operations with the pointer of the supplied keyboard.
Operations 3 Chapter
Creating a Title Graphic with the Text Typing Tool | 95 |
| |
|
|