Sony aws-g500 Audio Signal Related Settings, Assigning audio input signals to channel faders, Assigning a name, Specifying an audio input connector

Audio Signal Related Settings

These are preparations for handling audio signals on the unit.

Assigning audio input signals to channel faders

Assign audio signals input from the audio input connectors or signals input from the interface modules of the rear panel to channel faders 1 to 6.

If you assign different audio signals to the left and right channels (L/R) of the channel faders, they become stereo faders, and if you assign the same audio signal to both channels, they become monaural faders.

Caution

If you assign DV signals or SDI signals, they become stereo faders.

1 Press the MENU button.

2 In the top menu, select [Audio Input Assign].

3 Select the channel fader number from the list, and confirm, then set the following items in the submenu.

Assigning a name

Assign a name to the audio signal. The name assigned here appears in the source viewer with the same number as the channel fader.

1 Select [Source Name], and confirm; 2 enter the name in the input box, and confirm.

	1				2
1	Source Name	MICI	[	MIC1	]
2	Input (L)	MIC/LINE				Enter up to 20
3	Input (R)	Assign(R)
						alphanumeric characters.
4
5						* The source viewer can only
6						display a limited number of
						characters.

Specifying an audio input connector

Specify the audio signal to be assigned to the channel fader. For stereo audio, specify the source for each of the left and right channels separately.

For monaural audio, specify the same input for both left and right channels.

1Select [Input (L)], and confirm; 2 select the audio input connector from the list, and confirm.

		1		2
1	Source Name	MIC1	B MIC/LINE	1
2	Input (L)	MIC/LINE1	MIC/LINE	2
3	Input (R)	MIC/LINE1	MIC/LINE	3
4			MIC/LINE	4
5			MIC/LINE	5
6			MIC/LINE	6
			LINE	7
			LINE	8
			SLOT1	DV IN1
			SLOT1	DV IN2

Preparations 2 Chapter

Settings Related to Input Signals 59