Formatting a USB Flash Memory
Format a USB flash memory in order to use it with this unit.
1 Insert the USB flash memory into the USB connector on the side panel. The upper USB connector is number 1, and the lower connector is number 2.
FACTORY USE | REMOTE |
| NETWORK |
RGB(GUI)
USB
RESET
USB connector
2 Press the MENU button.
3 In the top menu, select [File Manager].
4 1 Select [Format] and confirm; 2 Select [USB Flash Memory 1] or [USB Flash Memory 2] and confirm.
Operations 3 Chapter
1
Delete
Disconnect
Recover
Export Job
Import Job
Import CG File
Import Logo File
Format
Local Disk Remain
2
HDD1
HDD2
HDD3
Memory Stick
USB Flash Memory 1
USB Flash Memory 2
The following confirmation message appears.
5 Press the ENTER button.
Formatting starts.
When formatting is completed, the following message appears.
6 Press the ENTER button, to close the message.
Formatting a USB Flash Memory | 183 |
| |
|
|