You can carry out operations on files stored on an external hard disk connected to the interface module.
Note
Operations can also carried out on .dv files recorded with an older version.
For the method of connection, see the section, “Connecting an external hard disk” (page 144)
File indicationsThe file name and timecode for a saved file are shown as follows.
File name:
The
Timecode: always starts from 00:00:00:00.
Playing files1 Press the NEXT selection button for the source viewer showing the hard disk number.
The HDD file guide menu appears in the menu display.
File Open
File Close | SHIFT z+(z) |
1
2
3
Note
When a DV connector of the SD video interface module with an external hard disk drive connected is set to be used for recording, the HDD file guide menu is not displayed.
2 Select [File Open] and confirm.
The file list appears.
File Open |
|
| 20051015 |
File Close | SHIFT z+(z) | 20051015 |
120051015
220051015
Caution
•Only files recorded on this unit appear.
•It is not possible to open a file while it is being recorded.
Note
File informationInformation on the selected file is displayed as shown below if you press and hold down the jog roller t button or the t key on the keyboard.
Operations 3 Chapter
Recording Video and Audio on an External Device | 147 |
| |
|
|