These are preparations for handling video signals or the unit.
Assigning video input signals to the selection buttonsAssign video signals to the selection buttons 1 - 6 (PGM selection and NEXT selection buttons).
1 Press the MENU button.
2 In the top menu, select [Video Input Assign].
3 From the list select the number of the selection button, and confirm, then set the following items in the submenu.
Assigning a name for the videoAssign a name for the video. The name assigned here appears in the source viewer with the same number as the selection button.
1Select [Source Name], and confirm; 2 enter the name in the input box, and confirm.
|
| 1 |
|
|
| 2 |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1 | Source Name | CAM1 |
| [ | CAM1 | ] |
|
2 | Input |
|
|
| Enter up to 20 | ||
3 | Control | Off |
|
|
| ||
|
|
| alphanumeric characters. | ||||
4 |
|
|
|
|
|
| |
5 |
|
|
|
|
|
| * The source viewer can only |
6 |
|
|
|
|
|
| display a limited number of |
|
|
|
|
|
|
| characters. |
|
|
|
|
|
|
|
Specify the video input to be assigned to the selection button is input.
1Select [Input], and confirm; 2 select the video input connector from the list, and confirm.
|
| 1 |
| 2 |
|
|
|
|
|
|
|
| Source Name | CAMERA1 | No Assign |
| |
1 |
| ||||
2 | Input |
| B SLOT1 IN1 | Composite | |
3 | Control | Off |
|
| |
4 |
|
|
|
| DV |
5 |
|
|
| SLOT1 IN2 | Composite |
6 |
|
|
|
| |
|
|
|
|
| DV |
|
|
|
| SLOT2 IN1 | Composite |
|
|
|
|
| |
|
|
|
|
| DV |
|
|
|
| SLOT2 IN2 | Composite |
|
|
|
|
| |
|
|
|
|
| DV |
|
|
|
| SLOT3 IN1 | RGB |
|
|
|
| SLOT3 IN2 | RGB |
|
|
|
|
|
|
Preparations 2 Chapter
Settings Related to Input Signals | 57 |
| |
|
|