Overview 1 Chapter
kIndicators (Ff)
These indicators show the direction in which the transition lever is being moved. Moving the transition lever in the direction of the lit indicator starts the transition or effect.
However, supposing you press the AUTO TRANS button after moving the transition lever to the middle, for example, an inconsistency between the position of the fader and the application of the effect will arise and both indicators will light.
lAUTO TRANS button
This button carries out an automatic transition with a preset transition time, either from one video to another or when applying an effect (page 69).
4Device control sectionUse these controls for remote control of a camera with VISCA support connected to this system (page 132) or hard disk operations (material recording, file playback) (page 144, 147).
1Numeric buttons 3 STOP button
4REW button
|
|
| ENTER |
| 8 Positioner |
7 | 8 | 9 |
|
| |
4 | 5 | 6 |
|
|
|
1 | 2 | 3 |
|
| 6 REC button |
|
|
| |||
|
|
|
|
| |
|
|
|
| REC | 7 SHIFT |
|
|
|
| SHIFT | button |
FTB |
|
|
|
|
|
2 PLAY |
|
|
|
| 5 FFWD |
button |
|
|
|
| button |
DSK |
|
|
|
| 9 Shuttle dial |
|
|
|
| JOG/SHUTTLE |
|
0Jog dial
aNumeric buttons
These buttons are used to save or recall a camera preset, or reset a camera (page 134, 138).
bPLAY button
This button plays back a file at normal speed. Hold down the REC button and press this button, to start recording on the hard disk (page 144).
cSTOP button
This button stops file playback. Press shift and then press this button to switch the source viewer back from viewing a file on the hard disk to normal input (page 149).
During recording on the hard disk, hold down the REC button and press this button to stop recording (page 146).
dREW button
During file playback, play back fast in the reverse direction. Each time you press, the reverse speed increases (in six steps) (page 149).
eFFWD button
During file playback, play back fast in the forward direction. Each time you press, the playback speed increases (in six steps) (page 149).
fREC button
This button is used to start or stop the external hard disk recording (page 145).
REC + PLAY button | Start hard disk recording |
|
|
REC + STOP button | Stop hard disk recording |
|
|
gSHIFT button
This button is pressed while using other controls to perform the following operations.
SHIFT + jog dial | Aperture (iris) adjustment on |
| camera with VISCA support |
|
|
SHIFT + numeric | Set camera presets |
button (1 to 6) |
|
|
|
SHIFT + numeric | Camera reset |
button (0) |
|
|
|
SHIFT + REW button | Skip to the beginning of a file |
|
|
SHIFT + FFWD | Skip to the end of a file |
button |
|
|
|
SHIFT + STOP | Close the file |
button |
|
|
|
hPositioner
This control is used to pan or tilt the camera. You can also control the speed of the camera by adjusting how hard you press this button (page 134).
You can also change the
iShuttle dial (outer ring)
This dial controls the camera zoom.
During file playback, turning this dial clockwise plays the file in the forward direction at a speed that corresponds to the amount the dial was turned (one of seven speeds) and turning this dial counterclockwise plays the file in the reverse direction at a speed that corresponds to the amount the dial was turned (one of seven speeds)
18 Names and Functions of Parts