Operations 3 Chapter
Recording Video and Audio on an External Device
If you use the DV connector and i.LINK connector of the SD interface module
Note
The DV connector, i.LINK connector, and PGM SDI output connector support different devices and recording data.
DV connector (DV IN/OUT DV PGM): connect a VCR, to record the program output video and audio.
i.LINK connector (HDD): connect an external hard disk, to record the video and audio input (page 144).
PGM SDI output connector (SDI OUT): connect an SDI input compatible VTR to record program output video and audio.
Caution
If a signal subjected to special processing is input to the synchronization signal, normal recording may not be possible.
Recording Program Output on a VCRWhen using the DV connectorBy connecting a VCR to the DV connector (DV IN/OUT) of the SD interface module
To begin recording to a VCR, select the DV connector to be used for recording.
Caution
If a DV connector is set to be used for recording, the recording of material input from the composite video input connector and
1 Connect the VCR to the DV connector.
Note
Depending on the model of VCR, signal input/output settings may be required. Refer to the Operating Instructions for the device to be connected.
2 Press the MENU button.
3 In the top menu, select [DV Output].
142 Recording Video and Audio on an External Device