1 Press the ACCESS button in the same column as the channel fader to which the audio you want to adjust is assigned.
2 1 In the top menu, select [Filter]; 2 select [High Cut (8kHz)] or [Low Cut (100Hz)].
12
Phase | 16 |
|
|
Input Trim | 0dB | High Cut (8kHz) |
|
Filter | Off | Low Cut (100Hz) | |
EQ | Off |
|
|
Limiter/Compressor | Off |
|
|
|
|
|
|
3 Press the ESC button to close the ACCESS menu.
Adjusting the EqualizerYou can adjust the audio quality by using the equalizer to set frequencies in the high, middle, and low audio ranges.
1 Press the ACCESS button in the same column as the channel fader to which the audio you want to adjust is assigned.
2 1 In the top menu, select [EQ]; 2 select [On], and confirm.
12
Input Trim | 0dB | Off |
|
|
Filter |
| On |
|
|
EQ | Off | High Freq. | XXkHz |
|
Limiter/Compressor | Off | High Level | XXdB | |
Pan | CNT | Middle Freq. | XXkHz | |
PGM OUT | On | Middle Level | XXdB | |
AUX1 OUT | Off | Low Freq. | XXkHz | |
AUX2 OUT | Off | Low Level | XXdB | |
|
|
|
|
|
3 1 Select an adjustment item from the list, select [On], and confirm; 2 adjust with the slider.
|
| 1 | 2 |
| ||
|
|
|
|
|
|
|
Input Trim | 0dB | Off |
|
|
|
|
Filter |
| On |
|
|
|
|
EQ | Off | High Freq. | XXkHz |
|
|
|
Limiter/Compressor | Off | High Level | XXdB |
|
| |
Pan | CNT | Middle Freq. | XXkHz |
|
| |
PGM OUT | On | Middle Level | XXdB |
|
| |
AUX1 OUT | Off | Low Freq. | XXkHz |
|
| |
AUX2 OUT | Off | Low Level | XXdB |
|
| |
|
|
|
|
|
|
|
The items you can adjust are as follows.
[High Freq.]: Adjusts the center frequency of the
[High Level]: Adjusts the level of the
[Middle Freq.]: Adjusts the center frequency of the
[Middle Level]: Adjusts the level of the
[Low Freq.]: Adjusts the center frequency of the
[Low Level]: Adjusts the level of the
4 Press the ESC button to close the ACCESS menu.
Operations 3 Chapter
Video/Audio Signal Adjustments and Settings | 165 |
| |
|
|