-SDI embedded audio cannot be assigned simultaneously to CH (1/2) and CH (3/4) of the same SDI input connector.

Similarly, select [Input (R)], and confirm; select the audio input connector from the list, and confirm.

When the input audio signal reaches the reference level, the input signal indication in the source viewer lights green and you can confirm that there is an audio input.

Input signal indication

4 Press the MENU button to close the menu.

Setting the MIC/LINE level of an audio input

If the peak indication appears (when set to the default MIC/LINE level of “Middle (-20 dB)”)

If the input audio signal is too loud, the peak indication in the source viewer lights red.

In this case, since the MIC/LINE level exceeds the standard input level, use the following procedure to adjust it.

Example: When the peak indication has lit with MIC/LINE 2 connected to R and MIC/LINE 1 connected to L, as illustrated below.

Preparations 2 Chapter

1

2

R

L

AUDIO IN

MIC/LINE

 

2

1

 

LINE

 

 

MIC/LINE

 

8

7

6

5

4

3

OFF ON

 

MIC/LINE

MIC/LINE

2

1

Press the MENU button.

In the top menu select [Audio MIC/LINE Level].

Settings Related to Input Signals

61