Overview 1 Chapter
1 Microphone/line input connectors (MIC/LINE) 1/2
AUDIO IN | PUSH | MIC/LINE | PUSH |
21
| LINE |
|
| MIC/LINE |
|
8 | 7 | 6 | 5 | 4 | 3 |
+45V
OFF ON
2 +48V switch
3Microphone/line input connectors (MIC/LINE) 3/4/5/6
4Line input connectors (LINE) 7/8
aMicrophone/line input connectors (MIC/ LINE) 1/2 (XLR 3-pin, TRS shared
balanced type)
Input an analog audio signal from a microphone or audio device.
b+48V switch
Use this switch when a capacitor microphone requiring a power supply is connected to the microphone/line input connectors (MIC/LINE) 1/
2.When this is in the ON position, +48V is supplied.
cMicrophone/line input connectors (MIC/
LINE) 3/4/5/6 (TRS balanced type)
Input an analog audio signal from a dynamic microphone or audio device.
dLine input connectors (LINE) 7/8 (RCA)
Input an analog audio signal from an audio device.
1MIX output connector 2 AUX output connector
(MIX) |
| (AUX) 1/2 |
R MIX L | 2 | AUX 1 R PGML |
HEADPHONES R | MONI | L |
|
| 3 PGM audio output |
AUDIO OUT | connectors (PGM) | |
5 Headphone connector | 4 Monitor output | |
(HEADPHONES) |
| connectors (MONI) |
aMIX output connector (MIX) L/R (RCA)
These connect to an external acoustic device to output audio signals (page 157).
bAUX output connector (AUX) 1/2 (TRS,
balanced)
These connect to an external acoustic device to output audio signals. The output level can be adjusted (page 156).
cPGM audio output connectors (PGM) L/
R (TRS, balanced)
These output the final audio (program audio) created by this unit (page 156).
dMonitor output connectors (MONI) L/R
(RCA)
These provide monitor outputs of any of the PGM/ AUX1/AUX2/MIX audio (page 158).
eHeadphone connector (HEADPHONES)
(standard phone jack)
This outputs one of the PGM/AUX1/AUX2/MIX audio (page 157).
The output level can be adjusted with the front panel monitor level adjustment knob (MONI LEVEL) (page 158).
20 Names and Functions of Parts