Operations 3 Chapter
4 In the top menu select [Audio Output].
The [Audio Output] menu appears.
5 1 Select the item connected to the connector in step 2, and confirm;
2while watching the video connected in step 1, adjust it with the slider.
12
PGM Delay | 2F |
|
|
AUX1 Delay | 2F |
|
|
AUX1 OUT Level | 0dB |
|
|
AUX2 Delay | 2F |
|
|
AUX2 OUT Level | 0dB |
|
|
MIX OUT Delay | 2F |
|
|
MIX OUT Level |
|
|
|
|
|
|
|
The items for which you can adjust the delay time are as follows.
[PGM Delay]: Sets the delay time for the program output audio in frame units.
[AUX1 Delay]: Sets the delay time for the audio output from the AUX1 connector in frame units.
[AUX2 Delay]: Sets the delay time for the audio output from the AUX2 connector in frame units.
[MIX OUT Delay]: Sets the delay time for the audio from the MIX output in frame units.
Cautions
•Adjusting the delay time may cause noise to occur.
•Video displayed on the PGM viewer lags several frames behind the video output from the PGM video output connectors.
6 Press the MENU button, to close the menu.
Adjusting the Output Using the Oscillator SignalThis is for setting the output oscillator signal for use during adjustment.
1 Press the MENU button.
2 In the top menu, select [Audio Utility].
3 Select [OSC], and confirm, and set the oscillator signal output.
Setting the oscillator signal frequency1Select [OSC Freq.], and confirm; 2 select the frequency from the submenu, and confirm.
| 1 |
|
| 2 |
|
|
|
|
|
|
|
|
| Off |
Audio Monitor | OSC Freq. | Off |
| |
OSC | OSC OUT Level | B 100Hz | ||
TB | OSC OUT |
|
| 440Hz |
|
|
|
| 1kHz |
|
|
|
| 10kHz |
|
|
|
|
|
168 Video/Audio Signal Adjustments and Settings