Appendix

Upgrading the Operating Software

This section describes how to upgrade when there are improvements to the operating software and hardware firmware.

Caution

When the external hard disk is connected to the unit, always disconnect it before upgrading the operating software.

Information on upgrades

Information on software upgrades is available from the Anycast Station portal site operated by Sony.

The following site also provides links to the portal site and information on upgrades.

https://www.ecspert.sony.biz/ecsite/ https://servicesplus.us.sony.biz/SoftwarePlusSearch.aspx (for the customers in the U.S.A.)

https://www.sonybiz.net/anycast (for the customers in Europe) Download to a “Memory Stick” or USB flash memory.

Upgrade procedure

1 Insert a “Memory Stick” or USB flash memory holding the installation program in the “Memory Stick” slot or USB connector on the side panel.

Cautions

Before carrying out the following operation, plug the device into the “Memory Stick” slot or USB connector used for installation only, and remove other devices.

2 Press the 1 (power) button on the side panel.

This powers on the unit.

“Memory Stick” slot

FACTORY USE

REMOTE

 

 

NETWORK

 

8

1

5

1

15

9

9

6

 

 

RGB(GUI)

 

 

 

USB

 

RESET

 

 

 

1 (power) button USB connector

3 After the startup screen, press the F10 (Fn+0) key on the keyboard while the message is displayed indicating that function key input is possible.

200 Maintenance