With the protective panel opened |
|
| 2 “Memory Stick” slot |
| ||
|
|
|
|
| ||
|
|
|
|
| 3 NETWORK connector | |
| 1 FACTORY USE |
| 4 REMOTE (remote control) | |||
| connector |
|
| |||
|
|
| connector | |||
|
|
|
|
| ||
| FACTORY USE |
|
| REMOTE | ||
|
|
|
|
| NETWORK |
|
| 8 | 1 |
|
| 5 | 1 |
| 15 | 9 |
|
| 9 | 6 |
|
|
|
|
| RGB(GUI) |
|
|
|
|
|
| USB |
|
| RESET |
|
|
|
|
|
qaVentilation |
| 8 1 | (power) | 5Internal hard disk | ||
| access indicator | |||||
holes |
| button |
| |||
|
| 6 USB connectors | ||||
| 9 RESET button |
|
| |||
| 0 Hole for |
|
| 7 Operating monitor connector (RGB (GUI)) | ||
Overview 1 Chapter
aFACTORY USE connector
Output a tally signal. Connecting this connector and the tally connector of a CCU (camera control unit) or other device enables the tally lamp of the camera to light (page 139).
b“Memory Stick” slot
This slot takes a “Memory Stick.” Use it for upgrading the operating software (page 200), importing font files (page 129), exporting/ importing job data (page 173 and 174), importing graphics files (page 175), etc.
While the “Memory Stick” is being accessed, the access indicator to the left of the slot lights.
cNETWORK connector (RJ-45)
Connect an external network adaptor or router. This supports
The green indicator blinks while the network is active.
An amber LED lights while the unit is connected by
Caution
When making Network connections
For safety, do not connect the Network connector to circuits which may be subjected to excessive voltage.
dREMOTE (remote control) connector
This connector is provided for future functional expansion.
eInternal hard disk access indicator
This indicator lights while the internal hard disk is being accessed.
fUSB connectors (USB) (USB
compatible)
The upper connector is number 1, and the lower connector is number 2.
Use these connectors to connect a USB keyboard. Also use them for connecting USB flash memory, upgrading the operating software (page 200), importing font files (page 129), exporting/ importing job data (page 173 and 174), importing graphics files (page 175), etc.
For details of the keyboards that can be used, consult your dealer or your Sony service representative.
When using the text typing tool software, you can connect and use a USB mouse.
Caution
•These do not support input from a USB camera.
•A USB mouse cannot be used with the main software.
gOperating monitor connector (RGB
(GUI)) (D-Sub 15-pin)
This connector outputs the operation screen to an external display at WXGA (1,280 ⋅ 800) size, at 60 Hz.
For information on which devices can be used, consult your dealer or your Sony service representative.
h1 (power) button
This button powers the unit on or off. If you hold down the power button for at least 4 seconds, this forces a shutdown.
After a forced shutdown, the settings of the unit may not be preserved.
iRESET button
This button is provided for future functional expansion.
Names and Functions of Parts | 23 |
| |
|
|