Operations 3 Chapter

Configuring the Network Settings

With the network environment set up, make the network settings for this unit.

Ask your network administrator for further information about your network.

1 Connect a network cable to the NETWORK connector of this unit.

Caution

In order to meet EMC standards, use an STP (shielded twisted pair) type

Ethernet cable.

2 Press the MENU button.

3 In the top menu, select [Network].

4 Set the following items in the submenu.

Entering the host name

1 Select [Host Name], and confirm; 2 enter the host name in the input box, and confirm.

1

2

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Apply

 

[ XXXXXXXXXX

]

 

Host Name

 

 

 

 

 

IP Setting

DHCP

 

 

 

 

DNS Setting

DHCP

 

 

 

 

MAC Address

 

 

 

 

 

 

 

 

 

 

 

Not more than 15 characters

The first character must be a letter.

Setting the IP address

1 Select [IP Setting], and confirm; 2 make a selection, and confirm.

1

 

2

 

 

 

 

 

Apply

 

Off

 

Host Name

 

DHCP

 

IP Setting

DHCP

Manual

 

DNS Setting

DHCP

IP Address

XXX.XXX.XXX.XXX

MAC Address

 

Subnet Mask

XXX.XXX.XXX.XXX

 

 

Default Gateway

XXX.XXX.XXX.XXX

 

 

 

 

[Off]: if IP address not set

[DHCP]: if address automatically obtained from DHCP server

[Manual]: to input address manually

When [Manual] is selected, enter the following items, and confirm. Input the default gateway if required.

[IP Address]: Enter the IP address.

[Subnet Mask]: Enter the subnet mask.

[Default Gateway]: Enter the default gateway address.

Caution

Because the unit uses “172.27.72.0 netmask 255.255.255.0” internally, the unit will not operate correctly if settings are configured to include “172.27.72.0 netmask 255.255.255.0”.

186 Streaming