Labeling a CD

— Disc Memo

You can label up to 100 CDs with titles of up to 20 symbols and characters. Whenever you load a labeled CD, the title appears in the display.

Note

When labeling CDs for the first time, be sure to first press FUNCTION repeatedly until “CD” appears in the display, and then erase all disc titles using the procedure “Erasing a disc title” on page 14.

1 Press FUNCTION repeatedly until “CD” appears in the display.

If “SHUF” or “PROGRAM” appears in the display, press PLAY MODE on the remote repeatedly until both disappear.

2 Press NAME EDIT/SELECT on the remote.

The cursor starts flashing.

3 Press NAME EDIT/SELECT on the remote repeatedly to select the desired type of character.

The display changes as follows: Selected AB* (Upper cases) tSelected ab* (Lower cases) tSelected 12 (Numbers) tSelected AB* (Upper cases)

t…

*Press number 1 repeatedly to display the following symbols.

‘ – / , . ( ) : ! ?

In addition, when the symbols above appear in the display, press .or >repeatedly to display the following symbols.

& + < > _ = ” ; # $ % @ `

4 Enter a character.

If you have selected uppercase or lowercase letters

1Press the corresponding letter button on the remote repeatedly until the character to be entered flashes.

Or, press the button once and press . or >repeatedly.

2Press CURSORt on the remote.

The flashing character is entered and the cursor shifts to the right.

If you have selected numbers

Press the corresponding number button on the remote.

The number is entered and the cursor shifts to the right.

To enter a blank space

1Press NAME EDIT/SELECT on the remote to select uppercase or lowercase letters.

2Press 10/0 on the remote.

A blank space is entered and the cursor shifts to the right.

5 Repeat steps 3 and 4 to enter the rest of the name.

To change a character

Press TCURSOR or CURSORton the remote repeatedly until the character to be changed flashes, press CLEAR on the remote to erase the character, then repeat steps 3 and 4.

6 Press ENTER/YES on the remote to complete the labeling procedure.

To cancel labeling

Press MENU/NO on the remote.

continued

CD

13