Recording a CD on an MD (continued)

If “Retry” flashes in the display after you press u (or MD N on the remote) in step 5

A reading failure has occurred, and the system is trying to read the data again.

•If the retry was successful, the MD deck continues with CD-MD High-Speed Synchro Recording.

•If the condition of the loaded CD or the system is poor, and retry fails, CD-MD High-Speed Synchro Recording is disabled. In this case, “NORM” flashes in the display and the MD deck automatically starts recording in normal CD-MD Synchro Recording. Note that monitoring of the recorded signal is not possible when this occurs.

To stop recording

Press x.

Tips

•You can record only your favorite CD tracks with CD Program Play. After step 3, follow the same procedures as from step 2 to 5 in CD Program Play (see page 11). Then go to step 4.

•You can switch the recording mode before step 3 and record for long times. For details, see “Recording for long times” on page 22.

•If you want to record only a portion of a CD track to an MD, you must first record the entire CD track (using CD-MD Synchro Recording or Rec It). Then use the A-B Erase function to erase the unwanted portions on the MD (see page 35).

Notes

•The following items are either inoperative or cannot be used during CD-MD Synchro Recording and CD-MD High-Speed Synchro Recording:

—The Auto Cut function (see page 25)

—The recording level specified in the Setup menu

—Recorded signal monitoring (CD-MD High- Speed Synchro Recording only).

•You cannot pause recording during CD-MD Synchro Recording and CD-MD High-Speed Synchro Recording.

•If you don’t perform step 5 within about 1 minute after step 4, the system returns to the original condition.

•The sound does not come from the TAPE OUT jack during CD-MD High-Speed Synchro Recording.

Recording on an MD

manually

— Manual Recording

With manual recording, you can record a radio program.

Manual recording cannot be done from the CD unit to the MD unit within the system.

1 Load a recordable MD.

2 Tune in to the desired station (see “Listening to the radio” on page 43).

3 Press REC/REC IT.

The MD deck stands by for recording.

4 Press u (or MD N on the remote).

To stop recording

Press x.

20